How to Fix 005-196 198 199 946 948 949 950 Error Code for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?
Posted by Xwk Tech on
005-196, 198, 199, 946, 948, 949, 950 Size Mismatch Jam RAP
BSD-ON: BSD 5.5 Document Feeding (2 of 2)
005-196 The 2nd sheet or later of the set was detected to be of a different size to the 1st sheet.
005-198 The length of the vertical scanning direction is less than the specified value, simplex 85mm (3.3 inches), duplex 110mm (4.3 inches).
005-199 The length of vertical scanning direction is the specified value or more, simplex 1275mm (50.1 inches), duplex 480.1mm (18.9 inches).
005-946 In no mix mode, a document with a shorter size in slow scan (SS) direction was fed.
005-948 In no mix mode, a document with a shorter size in slow scan (SS) direction was fed.
005-949 In no mix mode, a document with a longer size in slow scan (SS) direction was fed.
005-950 In no mix mode, a document with a longer size in slow scan (SS) direction was fed.
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
Refer to the procedure that follows as necessary:
• GP 7 How to Check a Sensor.
Perform the steps that follow:
1. Check the size of the document that was fed by the user.
2. Enter dC330. Check the sensors that follow:
• Code 005-206, DADF pre registration sensor, PL 5.70 Item 3.
• Code 005-221, tray size sensor 1, PL 5.55 Item 6.
• Code 005-222, tray size sensor 2, PL 5.55 Item 6.
3. If the fault persists, install a new DADF PWB, PL 5.10 Item 11.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
BSD-ON: BSD 5.5 Document Feeding (2 of 2)
005-196 The 2nd sheet or later of the set was detected to be of a different size to the 1st sheet.
005-198 The length of the vertical scanning direction is less than the specified value, simplex 85mm (3.3 inches), duplex 110mm (4.3 inches).
005-199 The length of vertical scanning direction is the specified value or more, simplex 1275mm (50.1 inches), duplex 480.1mm (18.9 inches).
005-946 In no mix mode, a document with a shorter size in slow scan (SS) direction was fed.
005-948 In no mix mode, a document with a shorter size in slow scan (SS) direction was fed.
005-949 In no mix mode, a document with a longer size in slow scan (SS) direction was fed.
005-950 In no mix mode, a document with a longer size in slow scan (SS) direction was fed.
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
Refer to the procedure that follows as necessary:
• GP 7 How to Check a Sensor.
Perform the steps that follow:
1. Check the size of the document that was fed by the user.
2. Enter dC330. Check the sensors that follow:
• Code 005-206, DADF pre registration sensor, PL 5.70 Item 3.
• Code 005-221, tray size sensor 1, PL 5.55 Item 6.
• Code 005-222, tray size sensor 2, PL 5.55 Item 6.
3. If the fault persists, install a new DADF PWB, PL 5.10 Item 11.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782