How to Fix 012-300 Error Code for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?
Posted by Xwk Tech on
012-300 Eject Cover Open RAP
BSD-ON: BSD 13.3 Office Finisher LX Interlock Switching
012-300 Eject cover switch open was detected.
Initial Actions
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
• Ensure that the eject cover, PL 13.25 Item 1 is closed.
• Check the eject cover switch, PL 13.27 Item 19 for improper installation.
• Check eject cover switch connectors for connection failure.
• Check the switch actuator for damage.
Procedure
1. Enter dC330 code 012-300. Actuate the eject cover switch. The display changes. If YES, go to 7. If NO, go to 2.
2. Check the wiring between J8889 pin 1 and 2 for an open or short circuit, or loose or damaged connectors. The wiring is good. If YES, go to 4. If NO, go to 3.
3. Install a new eject cover switch, PL 13.27 Item 19.
4. Check the wiring between J8889 on the eject cover switch and J8982 on the finisher for an open or short circuit, or loose or damaged connectors. If the check is good, install a new finisher PWB, PL 13.45 Item 2. The wiring is good. If YES, go to 6. If NO, go to 5.
5. Reconnect or repair as necessary.
6. Install a new finisher PWB, PL 13.45 Item 2.
7. Install a new finisher PWB, PL 13.45 Item 2.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
BSD-ON: BSD 13.3 Office Finisher LX Interlock Switching
012-300 Eject cover switch open was detected.
Initial Actions
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
• Ensure that the eject cover, PL 13.25 Item 1 is closed.
• Check the eject cover switch, PL 13.27 Item 19 for improper installation.
• Check eject cover switch connectors for connection failure.
• Check the switch actuator for damage.
Procedure
1. Enter dC330 code 012-300. Actuate the eject cover switch. The display changes. If YES, go to 7. If NO, go to 2.
2. Check the wiring between J8889 pin 1 and 2 for an open or short circuit, or loose or damaged connectors. The wiring is good. If YES, go to 4. If NO, go to 3.
3. Install a new eject cover switch, PL 13.27 Item 19.
4. Check the wiring between J8889 on the eject cover switch and J8982 on the finisher for an open or short circuit, or loose or damaged connectors. If the check is good, install a new finisher PWB, PL 13.45 Item 2. The wiring is good. If YES, go to 6. If NO, go to 5.
5. Reconnect or repair as necessary.
6. Install a new finisher PWB, PL 13.45 Item 2.
7. Install a new finisher PWB, PL 13.45 Item 2.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782