How to Fix 072-105 Error Code for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?
Posted by Xwk Tech on
072-105 Registration Sensor Jam (Tray 2) RAP
BSD-ON: BSD 8.5 Registration
072-105 The registration sensor did not actuate within the specified time after the registration clutch initialized during paper feed from tray 2.
Initial Actions
Check the condition of the paper in tray 2. Refer to GP 15 Paper and Media Size Specifications.
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
Refer to the procedures that follow as necessary:
• GP 6 How to Check a Motor.
• GP 7 How to Check a Sensor.
• GP 8 How to Check a Solenoid or Clutch.
Perform the steps that follow:
1. Check for obstructions in the paper path.
2. Check the tray 2 feed roll, nudger roll and retard roll, PL 80.25 for foreign substances or wear. Clean or install new components as necessary.
3. Enter dC330, code 077-104. Check the registration sensor, PL 80.55 Item 4.
4. Enter dC330, code 077-002. Check the registration clutch, PL 80.55 Item 11.
5. Enter dC330, code 077-001. Check the PH Drive assembly, PL 40.10 Item 3.
6. Enter dC330, code 077-033. As necessary, perform the steps that follow:
• Check the 1TM takeaway motor, PL 70.17 Item 4.
• Check the 3TM takeaway motor, PL 70.23 Item 4.
• Check the STM takeaway motor, PL 70.28 Item 2.
• Check the TTM takeaway motor, PL 70.85 Item 1.
7. Check the drive gears, PL 80.10 for wear or damage. Install new components as necessary.
8. Check the drive assembly, PL 40.10 Item 1 for wear or damage.
9. If the fault persists, install new components as necessary:
• 1TM PWB, PL 70.17 Item 5.
• 3TM PWB, PL 70.23 Item 5.
• STM PWB, PL 70.28 Item 4.
• TTM PWB, PL 70.90 Item 1.
• Drive PWB, PL 1.10 Item 4.
• ESS PWB,PL 3.10 Item 6.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
BSD-ON: BSD 8.5 Registration
072-105 The registration sensor did not actuate within the specified time after the registration clutch initialized during paper feed from tray 2.
Initial Actions
Check the condition of the paper in tray 2. Refer to GP 15 Paper and Media Size Specifications.
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
Refer to the procedures that follow as necessary:
• GP 6 How to Check a Motor.
• GP 7 How to Check a Sensor.
• GP 8 How to Check a Solenoid or Clutch.
Perform the steps that follow:
1. Check for obstructions in the paper path.
2. Check the tray 2 feed roll, nudger roll and retard roll, PL 80.25 for foreign substances or wear. Clean or install new components as necessary.
3. Enter dC330, code 077-104. Check the registration sensor, PL 80.55 Item 4.
4. Enter dC330, code 077-002. Check the registration clutch, PL 80.55 Item 11.
5. Enter dC330, code 077-001. Check the PH Drive assembly, PL 40.10 Item 3.
6. Enter dC330, code 077-033. As necessary, perform the steps that follow:
• Check the 1TM takeaway motor, PL 70.17 Item 4.
• Check the 3TM takeaway motor, PL 70.23 Item 4.
• Check the STM takeaway motor, PL 70.28 Item 2.
• Check the TTM takeaway motor, PL 70.85 Item 1.
7. Check the drive gears, PL 80.10 for wear or damage. Install new components as necessary.
8. Check the drive assembly, PL 40.10 Item 1 for wear or damage.
9. If the fault persists, install new components as necessary:
• 1TM PWB, PL 70.17 Item 5.
• 3TM PWB, PL 70.23 Item 5.
• STM PWB, PL 70.28 Item 4.
• TTM PWB, PL 70.90 Item 1.
• Drive PWB, PL 1.10 Item 4.
• ESS PWB,PL 3.10 Item 6.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782