How to Fix 089-616 Error Code for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?
Posted by Xwk Tech on
089-616 RC Data Overflow Fail-B RAP
089-616 The correction setting value of the calculation result has exceeded the allowed range.
Initial Actions
Enter dC125, if multiple chain 89 faults are indicated, refer to Chain 089 Entry RAP to determine the highest priority fault.
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
Enter dC675, perform the registration control setup cycle and compare the correction amount with the value in Table 1.
1. Fast Scan Margin or Slow Scan Margin have reached the minimum or maximum adjustment value. If YES, go to 5. If NO, go to 2.
2. Check the position of the drum cartridge of each color. The drum cartridge positions are good. If YES, go to 4. If NO, go to 3.
3. Correctly position all drum cartridges.
4. Install a new drum cartridge as necessary:
• Yellow drum cartridge, PL 90.20 Item 8.
• Magenta drum cartridge, PL 90.20 Item 7.
• Cyan drum cartridge, PL 90.20 Item 6.
• Black drum cartridge, PL 90.20 Item 5.
If the fault persists, install a new LPH, PL 60.35 Item 1, as necessary.
5. Check if Fast Scan Margin or Slow Scan Margin have reached the minimum or maximum adjustment value. Slow Scan Margin has reached the minimum or maximum adjustment value. If YES, go to 7. If NO, go to 6.
6. Raise/lower the LPH (Y, M, C, K) 2 to 3 times to check the LPH lift up/down mechanism. If no fault is found, install a new LPH, PL 60.35 Item 1, as necessary.
7. Install a new drive PWB, PL 1.10 Item 4. Enter dC675, perform the registration control setup cycle.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
089-616 The correction setting value of the calculation result has exceeded the allowed range.
Initial Actions
Enter dC125, if multiple chain 89 faults are indicated, refer to Chain 089 Entry RAP to determine the highest priority fault.
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
Enter dC675, perform the registration control setup cycle and compare the correction amount with the value in Table 1.
Table 1 Registration control adjustment ranges
1. Fast Scan Margin or Slow Scan Margin have reached the minimum or maximum adjustment value. If YES, go to 5. If NO, go to 2.
2. Check the position of the drum cartridge of each color. The drum cartridge positions are good. If YES, go to 4. If NO, go to 3.
3. Correctly position all drum cartridges.
4. Install a new drum cartridge as necessary:
• Yellow drum cartridge, PL 90.20 Item 8.
• Magenta drum cartridge, PL 90.20 Item 7.
• Cyan drum cartridge, PL 90.20 Item 6.
• Black drum cartridge, PL 90.20 Item 5.
If the fault persists, install a new LPH, PL 60.35 Item 1, as necessary.
5. Check if Fast Scan Margin or Slow Scan Margin have reached the minimum or maximum adjustment value. Slow Scan Margin has reached the minimum or maximum adjustment value. If YES, go to 7. If NO, go to 6.
6. Raise/lower the LPH (Y, M, C, K) 2 to 3 times to check the LPH lift up/down mechanism. If no fault is found, install a new LPH, PL 60.35 Item 1, as necessary.
7. Install a new drive PWB, PL 1.10 Item 4. Enter dC675, perform the registration control setup cycle.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782