How to Perform ADJ 60.5 Optics Cleaning Procedure for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?
Posted by Xwk Tech on
Parts List on PL 60.10
Purpose
To clean the optics components of the scanner ensuring optimum image quality.
NOTE: This adjustment must only be performed if directed to from an Image Quality RAP, or if the optics cavity was opened to install a new component and contamination can be seen on the optics components.
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
1. Remove the document glass, REP 60.1.
2. Inspect the cleanliness of the optics mirrors, if necessary, clean them as follows:
a. Vacuum clean the area to remove all visible contamination, taking care not to touch the mirrors with the cleaning nozzle. It may be necessary to move the carriages to gain reasonable access, do this by hand rotation of the flywheel on the capstan shaft.
b. Wash your hands.
c. Carefully clean the mirrors using a dry micro fiber wiper. It may be necessary to use
a cleaning cloth dampened with film remover on stubborn contamination.
d. Polish the mirrors with a dry micro fiber wiper.
e. Check that the mirror surfaces are now clean. Repeat the cleaning operation if necessary.
f. Examine the lenses of the APS sensors, PL 60.10 Item 10. Clean if necessary with a micro fiber wiper.
3. Inspect the cleanliness of the document glass and CVT glass, if necessary, clean them as follows:
a. Clean the under side of document glass and CVT glass using a micro fiber wiper, dampened with film remover.
b. Polish the under side of document glass and CVT glass with a dry micro fiber wiper.
c. Install the document glass and CVT glass, taking care not to smear the cleaned underside.
d. Clean the upper side of document glass and CVT glass using a micro fiber wiper, dampened with film remover.
e. Polish the upper side of document glass and CVT glass using a dry micro fiber wiper.
4. Re-install the remainder of the removed components.
**This adjustment is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
Purpose
To clean the optics components of the scanner ensuring optimum image quality.
NOTE: This adjustment must only be performed if directed to from an Image Quality RAP, or if the optics cavity was opened to install a new component and contamination can be seen on the optics components.
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
1. Remove the document glass, REP 60.1.
2. Inspect the cleanliness of the optics mirrors, if necessary, clean them as follows:
a. Vacuum clean the area to remove all visible contamination, taking care not to touch the mirrors with the cleaning nozzle. It may be necessary to move the carriages to gain reasonable access, do this by hand rotation of the flywheel on the capstan shaft.
b. Wash your hands.
c. Carefully clean the mirrors using a dry micro fiber wiper. It may be necessary to use
a cleaning cloth dampened with film remover on stubborn contamination.
d. Polish the mirrors with a dry micro fiber wiper.
e. Check that the mirror surfaces are now clean. Repeat the cleaning operation if necessary.
f. Examine the lenses of the APS sensors, PL 60.10 Item 10. Clean if necessary with a micro fiber wiper.
3. Inspect the cleanliness of the document glass and CVT glass, if necessary, clean them as follows:
a. Clean the under side of document glass and CVT glass using a micro fiber wiper, dampened with film remover.
b. Polish the under side of document glass and CVT glass with a dry micro fiber wiper.
c. Install the document glass and CVT glass, taking care not to smear the cleaned underside.
d. Clean the upper side of document glass and CVT glass using a micro fiber wiper, dampened with film remover.
e. Polish the upper side of document glass and CVT glass using a dry micro fiber wiper.
4. Re-install the remainder of the removed components.
**This adjustment is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782