PL 80.61 HCF Feeder for Xerox VersaLink C7020 C7025 C7030 C7000 Printer

Posted by Xwk Tech on


PL 80.61 HCF Feeder (2 of 3)

PL 80.61 HCF Feeder for Xerox C7020 C7025 C7030 C7000

Item Part Description
1 - Upper feeder assembly (P/O PL 70.45 Item 11)
2 003E59570 Latch
3 - Shaft latch (P/O PL 80.61 Item 1)
4 006K23124 Feed shaft assembly (REP 80.23, REP 80.25)
5 - Feed shaft (P/O PL 80.61 Item 4)
6 413W66250 Ball bearing
7 - Gear 20T (P/O PL 80.61 Item 4)
8 007E78180 Feed gear 25T
9 - Lever (P/O PL 80.61 Item 1)
10 - Bearing (P/O PL 80.61 Item 1)
11 - Spacer (P/O PL 80.61 Item 1)
12 - Pin drive (P/O PL 80.61 Item 1)
13 - Guide (P/O PL 80.61 Item 1)
14 - Rear upper chute (P/O PL 80.61 Item 1)
15 - Upper chute (P/O PL 80.61 Item 1)
16 120E21900 Actuator
17 - Upper frame (P/O PL 80.61 Item 1)
18 - Spring (P/O PL 80.61 Item 1)
19 930W00112 HCF no paper sensor (Q78-200)/HCF level sensor (78-201)
20 - HCF Pre feed sensor (Q78-100) (P/O PL 80.61 Item 1)
21 - Wire harness (P/O PL 80.61 Item 1)
22 - Feed roll (P/O PL 80.61 Item 24)
23 - Nudger roll (P/O PL 80.61 Item 24)
24 604K23660 Feed roller kit (REP 80.22)
Note: Item 1 contains item 2-21. Item 4 contains item 5-7. Item 24 contains item 22, 23, PL 80.62 item 2.

**This PL 80.61 is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**

You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.

Toner Chip (For North America and West Europe Region):

106R03741 106R03744 106R03743 106R03742
106R03757 106R03760 106R03759 106R03758
106R03737 106R03740 106R03739 106R03738

Toner Chip (For South America and East Europe Region):

106R03749 106R03752 106R03751 106R03750
106R03745 106R03748 106R03747 106R03746
106R03765 106R03768 106R03767 106R03766

Toner Chip (For Metered Machine):

106R03733 106R03736 106R03735 106R03734

Drum Chip:

113R00780 113R00782


Share this post



← Older Post Newer Post →


Leave a comment